Products > Roofing > i-SEAM™

i-SEAM™

i-SEAM™

imetal

JHRU5374 - Copy

Architectural Specification

The roofing / walling shall be in IMETAL  I-SEAM™ roofing in continuous lengths. Seaming heights shall be 25mm rib height sheeting material shall be protected sheet to AZ150/AZ200 aluminium/zinc alloy wating with infrared paint film of selected colour from COLOURCOIL® range.

2


3

Profile Thickness Paint System Coating System
IMetal I-SEAMTM 0.63mm TCT
0.65mm TCT
DUOTONE PVF2 SERIESTM
METALLIC PVF2 SERIESTM
PVF2 SERIESTM
KRISTALMATT SERIESTM
ELITE SERIESTM
AZ 200
AZ 150

Compatibility

All building products need to be checked for compatibility with adjacent materials. These checks need to be for both direct contact between materials, and where water runs from one material to another. The following guidelines generally avoid material incompatibility:

  • For zinc-aluminium alloy coated steel, avoid copper, lead, green or treated timber, stainless steel and mortar or concrete.

Fastener

All fastening screws must conform to AS3566 - Class 3. They are to be hexagon headed and for roofing must be used with sealing washers. For connecting to purlins or top hats use:

4

5
6
 

Project References for ... imetal

7

8

9